Peaty's Tubeless Rim Tape 21mm x 50m

Don't settle for plumber's tape to protect your rims! Peaty's Tubeless Rim Tape was designed for shredders, by shredders; constructed from dual-layered, high tensile strength film & primed with a bespoke adhesive, forming a strong air-tight seal with your rim that leaves little to no mess behind when you remove it. An absolute must for tubeless tyres to perform at their best!

Features

• Transparent design allows you to easily spot valve holes
• Cloth finishing strips included to prevent peelback. (28 x per 50m roll)
• Optimum stretch and rigid, recyclable core means you can apply with tension for the best fit.
• Size: 21mm width x 50m length

How To Apply

1. Remove tyre and any old rim tape, use a cleaner to remove any grease.
2. Clean and degrease rim thoroughly, ensuring rim is completely dry before application.
3. Starting two spokes behind the valve hole, press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air.
4. Run tape around the rim while keeping tape tension, finishing two spoke holes beyond the valve hole.
5. Check for any trapped air underneath the rim tape. Push air bubbles out to a spoke hole to remove.
6. Cover the end of the tape with a strip of the finishing tape provided to prevent peel back.
7. Use a small spike to pierce the tape in the centre of the valve hole.
8. Remove dust cap, lock ring and o-ring then push valve stem through the valve hole.
9. Re-apply the o-ring and apply lock ring tightly by hand, ensuring there are no air gaps.
10. Refit tyre, add tubeless sealant.
11. Inflate tyre to desired pressure.
12. RIDE!